CineStill 800T Preset for Lightroom: The Night Film Look

Short answer: CineStill 800T is a tungsten-balanced colour film made from Kodak motion picture stock. At night it gives cool, cinematic shadows, warm street lights and its famous red glow (halation) around bright lights. In Lightroom you get close with a cool white balance, lifted blacks, teal shadows, warm highlights, fine grain and a soft glow on the brightest areas. The settings table below is a reliable starting point, and our Moody Film Archive gives you the cinematic night look in one click.

What makes CineStill 800T look the way it does

CineStill 800T started as Kodak Vision3 500T, a film made for movie cameras. CineStill removes the film's black anti-halation backing (the remjet layer) so it can be developed in a normal photo lab, and sells it rated at ISO 800. Three things give it its look:

  • Tungsten balance. The film is balanced for warm artificial light of about 3200K. Under street lamps and neon, colours look natural or slightly cool. In daylight, the same film turns blue unless you use a warming filter.
  • Halation. Without the remjet layer, bright light bounces back through the film and creates a red or orange glow around lamps, signs and car lights. This glow is the signature of 800T.
  • Cinematic colour. Because it is a cinema stock, colour is muted and contrast is gentle, with deep but readable shadows. Skin stays soft, and blues and teals dominate the dark areas of the frame.

When people search for a CineStill look, they almost always mean night photos: wet city streets, neon signs, cars, diners and train stations. That is where the film shines, and where a preset based on it works best.

CineStill 800T settings in Lightroom

Use these as a starting point on night and low-light photos. Shoot RAW if you can: night scenes need the extra room in the shadows and highlights.

SettingStarting pointWhy
White balance3000 to 3600K, Tint +5Recreates the tungsten balance: lamps neutral, everything else cool
Exposure+0.2 to +0.5800T was usually shot for the shadows; night scenes need lift
Contrast+5 to +10Gentle cinema contrast, not harsh
Highlights / Whites-40 / -15Keeps lights from clipping so the glow can show
Shadows / Blacks+15 / +15 to +25Readable shadows and the lifted film base
Colour grading, shadowsHue 190 to 200, saturation 15 to 20The teal-blue night shadows
Colour grading, highlightsHue 30 to 40, saturation 10 to 15Warm, glowing lights
HSL: Red / Orange saturation+10 / -5Strong neon reds, skin that does not turn orange
HSL: Blue hue / saturation-10 / -10Moves blues towards teal and calms them down
GrainAmount 25 to 35, size 30, roughness 50ISO 800 film grain, visible but fine
Noise reductionLuminance 10 to 20Removes digital noise before grain is added

How to fake the halation glow in Lightroom

Lightroom has no halation slider, but you can get close in two minutes with a luminance mask:

  1. Open Masking and choose Luminance Range. Select only the brightest areas: street lights, signs and headlights.
  2. In that mask, set Temperature +20 to +30 and Tint +20. This tints the light sources red-orange.
  3. Lower Clarity to -40 and Texture to -30 in the same mask. This spreads the light softly, like a glow.
  4. Raise the mask's feather (the range smoothness) so the effect fades into the dark around the light instead of stopping at a hard edge.

Keep it subtle. Real halation is a thin red ring, not a fog over the whole image. If you edit in Photoshop as well, a blurred, red-tinted copy of the highlights on a Screen layer gives an even more convincing result.

CineStill 800T vs other night and cinematic looks

LookColourBest forDifference
CineStill 800TCool shadows, warm lights, red glowNight streets, neon, carsTungsten balance and halation
Teal and orangeStrong teal and orange splitAction, travel videosMore saturated and digital; often overdone
Kodak Portra 800Warm, natural skinIndoor portraits, evening eventsDaylight balanced, no red glow
Moody filmMuted, deep shadowsOvercast days, interiors, autumnWorks in daylight too, less neon

Read more about the difference between a cinematic film look and the overdone digital version in why teal and orange looks dated and our cinematic Lightroom preset guide.

How to shoot photos that suit the 800T look

  • Shoot at blue hour or after dark. The look needs mixed light: dark sky, warm lamps, coloured signs.
  • Look for wet streets and reflections. Rain doubles every light source and makes the glow more visible.
  • Put a light source in the frame. No bright lights means no halation.
  • Underexpose slightly in camera, then lift in Lightroom. Protecting the highlights matters more than clean shadows.
  • Phone users: use night mode with care. It brightens the scene so much that the cinematic darkness disappears. Shoot in RAW or ProRAW and keep it dark.

CineStill 800T adjustments by scene

Night scenes vary much more than daylight scenes, because every light source has its own colour. After applying the base settings, adjust per scene:

SceneAdjustWhy
Neon signs and city centresRed and magenta saturation -5, Highlights -20 moreNeon clips quickly and can look cheap when oversaturated
Sodium street lights (orange)Temperature -300 to -500K, Orange saturation -10Stops the whole frame from turning orange
LED street lights (white-blue)Temperature +200K, shadows hue towards 200Keeps the warm-cool contrast the film is known for
Restaurants, bars, dinersExposure +0.3, Orange luminance +5Warm interior light, faces stay bright
Rain and reflectionsClarity -10, Dehaze -5Softens wet surfaces and makes light bloom
Blue hourTemperature as shot, Blue saturation -15Sky stays deep without turning electric blue

Using the 800T look in daylight

Photographers who shoot CineStill 800T in daylight usually put a warming filter (an 85 filter) on the lens, because the tungsten-balanced film otherwise renders sunlight very blue. The result is a soft, slightly cool cinema look with muted colour. To recreate that version in Lightroom:

  • Keep white balance close to as shot, then cool it by only 200 to 400K.
  • Skip the halation mask: there are no light sources for it to work on.
  • Lower overall saturation by 10 and add Contrast +10 for the cinema feel.
  • Keep the grain the same as on your night photos so a mixed day and night series still matches.

Without the warm correction, daylight photos with an 800T recipe look cold and blue. Some photographers like that on purpose for winter or rainy days, but it is rarely flattering on skin.

Presets for the CineStill night look

If you do not want to build this from scratch, these collections are the closest in our shop:

  • Moody Film Archive: six cinematic looks with deep, textured shadows and muted colour. The best match for night streets.
  • Vesper Archive: clean film looks that hold up in low light, including a dark, atmospheric variant for evenings in the city.
  • The Studio Archive: every collection, 110+ presets, so you have a night look, a daylight look and black and white in one download.

After applying a preset, add the halation mask above to the brightest lights for the full 800T effect. Not ready to buy? Test our film colour with Analog 06, our free film preset.

Shop by film stock: see all film Lightroom presets, from Portra and Gold to black and white.

Frequently asked questions

Can you get the CineStill 800T look in Lightroom Mobile?

Yes. All the settings above, including colour grading and luminance masks, are available in the free Lightroom Mobile app. Only the Photoshop halation trick needs a computer.

Why does my CineStill edit look blue?

Because the look is tungsten balanced, daylight scenes turn blue. That is accurate to the film, but if you do not like it, warm the white balance by 1000 to 1500K on daylight photos.

What is halation?

Halation is a glow around bright light sources. On CineStill film it appears red or orange because light reflects back through the film's red-sensitive layer after the anti-halation backing has been removed.

Does the 800T look work for portraits?

Yes, at night or under warm indoor light. Keep Orange saturation slightly lower so skin does not look too warm next to the cool shadows.

Is CineStill 800T the same as Kodak Vision3 500T?

It is based on it. CineStill removes the remjet layer so the film can be developed in standard C-41 chemistry, which also creates the red halation that Vision3 500T does not normally show.

Previous
Previous

Kodak Gold 200 Preset for Lightroom: Settings and Looks

Next
Next

Best Lightroom Presets in 2026: 5 Collections Compared Honestly